XBD series - IS horizontal single fire pump group
times：
Summary.
XBD-IS series pump is a single-stage, single-suction cantilever centrifugal pump, mainly used for industrial and city fire water supply. The product has strong usability, performance parameters of a wide range of features; easy installation, small vibration, low noise. Its salient features are reliable sealing, high efficiency, long service life, saving capital. This series of pump the maximum working pressure of 1.6MPa, the pump body of hydrostatic test for the 2.4MPa, if the pump system pressure exceeds 1.6MPa, please when ordering.
Pump model significance:
XBD3.2/10-IS80-65-160
XBD---- motor driven fire pump set
3.2---- rated outlet pressure ( 0.32MPa )
10---- rated flow rate ( L/s )
IS---- Horizontal single-stage centrifugal pump
80---- pump inlet diameter ( mm )
65---- pump outlet diameter ( mm )
160---- impeller nominal diameter ( mm )
Structure description:
1), select Y series motor and pump, elastic coupling power transmission.
2), a pump shaft: selection of low noise rolling bearing; enhances the service life of shaft, reducing noise.
3), a pump cover: elaborate design. The same pump cover can be assembled mechanical seal, but also can be provided with packing seal.
4), mechanical seal: use of high-quality mechanical seal. Mechanical seal for high pressure and long service life, no leakage, no wear and tear on the shaft, no water scale, to ensure that the work environment clean and tidy.
5), drain pump for water: when not in use.
6), the impeller: materials for the bronze. Impeller efficiency, performance curve hump characteristics.
7), a pump shaft and a motor shaft coupling: between the elastic coupling, pump and motor can be automatically compensated between different axes, greatly improving the service life of the pump.
XBD-IS Series Horizontal single-stage fire pump set of basic parameters
| Pump model | A1 | L1 | L2 | L3 | H | B1 | B | L | n-d | a | h |
|
| XBD3.3/5-IS65-50-160 | 110 | 830 | 190 | 540 | 220 | 400 | 450 | 940 | 4-16 | 80 | 160 |
|
| XBD4.8/5-IS65-40-200 | 110 | 830 | 185 | 540 | 250 | 400 | 450 | 1075 | 4-16 | 100 | 180 |
|
| XBD7.8/5-IS65-40-250 | 160 | 1075 | 220 | 660 | 270 | 490 | 540 | 1200 | 4-16 | 100 | 225 |
|
| XBD12.5/5-IS65-40-315 | 155 | 1200 | 245 | 740 | 290 | 550 | 600 | 1400 | 4-20 | 125 | 250 |
|
| XBD3.2/10-IS80-65-160 | 110 | 830 | 185 | 540 | 250 | 400 | 450 | 960 | 4-16 | 100 | 180 |
|
| XBD5.5/10-IS80-50-200 | 130 | 955 | 210 | 600 | 250 | 440 | 490 | 1085 | 4-16 | 100 | 200 |
|
| XBD8.5/10-IS80-50-250 | 130 | 1135 | 220 | 660 | 270 | 490 | 540 | 1270 | 4-20 | 125 | 225 |
|
| XBD12.7/10-IS80-50-315 | 155 | 1200 | 245 | 740 | 315 | 550 | 600 | 590 | 4-26 | 125 | 280 |
|
| XBD3.3/25-IS100-80-160 | 130 | 1075 | 220 | 660 | 250 | 490 | 540 | 1200 | 4-16 | 100 | 200 |
|
| XBD5/25-IS100-65-200 | 130 | 1135 | 220 | 660 | 270 | 490 | 540 | 1270 | 4-20 | 100 | 255 |
|
| XBD8.2/25-IS100-65-250 | 140 | 1215 | 245 | 740 | 290 | 550 | 600 | 1400 | 4-20 | 125 | 250 |
|
| XBD12.1/25-IS100-65-315 | 210 | 1505 | 325 | 940 | 390 | 670 | 720 | 1655 | 4-20 | 125 | 280 |
|
| XBD3.1/45-IS125-80-160 | 155 | 1200 | 245 | 740 | 290 | 550 | 600 | 1410 | 4-20 | 100 | 225 |
|
| XBD5/45-IS125-80-200(I)1) | 140 | 1270 | 260 | 740 | 315 | 550 | 590 | 1450 | 4-20 | 100 | 250 |
|
| XBD7.8/45-IS125-80-250(I)1) | 210 | 1505 | 3225 | 940 | 390 | 670 | 820 | 1635 | 4-20 | 100 | 280 |
|
| XBD12.3/45-IS125-80-315(I)1) | 210 | 1600 | 325 | 940 | 425 | 670 | 720 | 1855 | 4-20 | 125 | 315 |
|
| Pump model | A1 | L1 | L2 | L3 | H | B1 | B | L | n-d | a | h |
|
| XBD5/55-IS125-100-200(Ⅱ)1) | 140 | 1270 | 260 | 740 | 335 | 550 | 600 | 1440 | 4-20 | 125 | 280 |
|
| XBD7.8/55-IS125-100-250(Ⅱ)1) | 210 | 1505 | 325 | 940 | 390 | 670 | 720 | 1690 | 4-20 | 140 | 280 |
|
| XBD12.3/55-IS125-100-315(Ⅱ)1) | 210 | 1540 | 325 | 940 | 425 | 670 | 720 | 1870 | 4-20 | 140 | 315 |
|
| XBD3.0/55-IS150-125-315 | 160 | 1285 | 290 | 840 | 390 | 600 | 600 | 1450 | 4-20 | 140 | 355 |
|
| XBD5.1/55-IS150-125-400 | 160 | 1345 | 290 | 840 | 425 | 600 | 650 | 1545 | 4-20 | 140 | 400 |
|
| XBD3.2/110-IS200-150-315 | 190 | 1555 | 320 | 940 | 425 | 670 | 720 | 1750 | 4-20 | 160 |
|
|
| XBD4.6/110-IS200-150-400 | 190 | 1665 | 340 | 940 | 425 | 670 | 720 | 1890 | 4-20 | 160 | 450 |
|
| XBD3.2/160-IS250-200-315 | 95 | 1940 | 250 | 1980 | 425 | 750 | 820 | 2265 | 6-24 | 180 | 450 |
|
| XBD5/160-IS250-200-400 | 95 | 2188 | 250 | 1640 | 465 | 755 | 825 | 2520 | 6-24 | 180 | 500 |
|
|
Note: 1 ) inlet, outlet diameter and nominal diameter the same pump impeller due to performance parameter, so the use of (I ), ( II ) to distinguish between. |
||||||||||||
| Pump model | Suction flange | Exhaust flange | 质量 kg | ||||||||
| DN | D | K | C | n-z | DN | D | K | C | n-z | ||
| XBD3.3/5-IS65-50-160 | 65 | 185 | 145 | 20 | 4-17.5 | 50 | 165 | 125 | 20 | 4-17.5 | 191 |
| XBD4.8/5-IS65-40-200 | 65 | 185 | 145 | 20 | 4-17.5 | 40 | 150 | 110 | 18 | 4-17.5 | 170 |
| XBD7.8/5-IS65-40-250 | 278 | ||||||||||
| XBD12.5/5-IS65-40-315 | 417 | ||||||||||
| XBD3.2/10-IS80-65-160 | 80 | 200 | 160 | 20 | 8-17.5 | 65 | 185 | 145 | 20 | 4-17.5 | 155 |
| XBD5.5/10-IS80-50-200 | 80 | 200 | 160 | 20 | 8-17.5 | 50 | 165 | 125 | 20 | 4-17.5 | 230 |
| XBD8.5/10-IS80-50-250 | 335 | ||||||||||
| XBD12.7/10-IS80-50-315 | 430 | ||||||||||
| XBD3.3/25-IS100-80-160 | 100 | 220 | 180 | 22 | 8-17.5 | 80 | 200 | 160 | 20 | 8-17.5 | 250 |
| XBD5/25-IS100-65-200 | 100 | 220 | 180 | 22 | 8-17.5 | 65 | 185 | 145 | 20 | 4-17.5 | 335 |
| Pump model | Suction flange | Exhaust flange | 质量 kg | ||||||||
| DN | D | K | C | n-z | DN | D | K | C | n-z | ||
| XBD8.2/25-IS100-65-250 | 100 | 220 | 180 | 22 | 8-17.5 | 65 | 185 | 145 | 20 | 4-17.5 | 440 |
| XBD12.1/25-IS100-65-315 | 824 | ||||||||||
| XBD3.1/45-IS125-80-160 | 125 | 250 | 210 | 22 | 8-17.5 | 80 | 200 | 160 | 20 | 8-17.5 | 386 |
| XBD5/45-IS125-80-200(I)1) | 500 | ||||||||||
| XBD7.8/45-IS125-80-250(I)1) | 875 | ||||||||||
| XBD12.3/45-IS125-80-315(I)1) | 1290 | ||||||||||
| XBD5/55-IS125-100-200(Ⅱ)1) | 125 | 250 | 210 | 22 | 8-17.5 | 100 | 220 | 180 | 22 | 8-17.5 | 500 |
| XBD7.8/55-IS125-100-250(Ⅱ)1) | 817 | ||||||||||
| XBD12.3/55-IS125-100-315(Ⅱ)1) | 1290 | ||||||||||
| XBD3.0/55-IS150-125-315 | 150 | 285 | 240 | 24 | 8-22 | 125 | 250 | 210 | 22 | 8-17.5 | 605 |
| XBD5.1/55-IS150-125-400 | 640 | ||||||||||
| XBD3.2/110-IS200-150-315 | 200 | 340 | 295 | 24 | 12-22 | 150 | 285 | 240 | 24 | 8-22 | 825 |
| XBD4.6/110-IS200-150-400 | 1110 | ||||||||||
| XBD3.2/160-IS250-200-315 | 250 | 405 | 355 | 28 | 12-28 | 200 | 340 | 295 | 24 | 12-22 | 1630 |
| XBD5/160-IS250-200-400 |
|
||||||||||
|
Note: 1 ) inlet, outlet diameter and nominal diameter the same pump impeller due to performance parameter, so the use of (I ), ( II ) to distinguish between. |
|||||||||||
| 泵 型 号 | 额定流量 Q | 额定出口压力 PN MPa | 效率 % | 转速 n r/min | 功率 (kW) | 必需汽蚀余量 （ NPSH)r m | ||
| m3/h | L/s | |||||||
| 轴功率 | 电机功率 | |||||||
|
XBD3.3/5-IS65-50-160 |
10.8 18 21.6 | 3 5 6 | 0.34 0.33 0.32 | 54 65 66 | 2900 | 2.65 3.35 3.71 | 4 | 2.0 2.0 2.5 |
|
XBD4.8/5-IS65-40-200 |
0.49 0.48 0.47 | 49 60 61 | 4.42 5.67 6.29 | 7.5 | ||||
| 9.05 10.9 12.0 | 13 | |||||||
|
XBD7.8/5-IS65-40-250 |
0.80 0.78 0.77 | 37 50 53 | ||||||
|
XBD12.5/5-IS65-40-315 |
1.27 1.25 1.23 | 28 50 44 | 18.5 21.3 22.8 | 25 | 2.5 2.5 2.75 | |||
|
XBD3.2/10-IS80-65-160 |
21.6 36 43.2 | 6 10 12 | 0.34 0.32 0.31 | 61 73 72 | 4.82 5.97 6.59 | 7.5 | 2.5 2.5 2.6 | |
| 7.87 9.87 10.8 | 11 | |||||||
|
XBD5.5/10-IS80-50-200 |
0.56 0.55 0.53 | 55 69 71 | ||||||
| 13.2 17.3 19.2 | 22 | |||||||
|
XBD8.5/10-IS80-50-250 |
0.89 0.85 0.80 | 52 63 64 | ||||||
| 25.5 31.5 35.5 | 37 | |||||||
|
XBD12.7/10-IS80-50-315 |
1.29 1.27 1.24 | 41 54 57 | ||||||
|
XBD3.3/25-IS100-80-160 |
59.4 90 108 | 16.5 25 30 | 0.36 0.33 0.31 | 70 78 75 | 8.4 11.1 12.2 | 15 | 3.5 4.0 5.0 | |
|
XBD5/25-IS100-65-200 |
0.53 0.50 0.48 | 65 76 77 | 13.6 17.9 19.9 | 22 | 3.3 3.6 3.7 | |||
|
XBD8.2/25-IS100-65-250 |
0.84 0.82 0.79 | 61 72 73 | 23.4 30.3 33.3 | 37 | 3.5 3.8 4.8 | |||
|
XBD12.1/25-IS100-65-315 |
1.23 1.21 1.20 | 55 60 67 | 39.6 51.6 57.5 | 75 | 3.0 3.6 4.2 | |||
| 泵 型 号 | 额定流量 Q | 额定出口压力 MPa |
效率% | 转速 r/min |
功率 (kW) |
必需汽蚀余量 rm |
||
| m3/h | L/s | |||||||
| 轴功率 | 电机功率 | |||||||
|
XBD3.1/45-IS125-80-160 |
97.2 162 194.4 | 27 45 54 | 0.36 0.31 0.28 |
72 80 77 |
2900 | 13.1 17.5 19.0 |
22 | 5.6 |
|
XBD5/45-IS125-80-200(Ⅰ)1) |
0.55 0.50 0.48 |
66 80 78 |
21.8 27.2 30.8 |
37 | 5.2 | |||
|
XBD7.8/45-IS125-80-250(Ⅰ)1) |
0.86 0.78 0.71 |
65 77 74 |
35.0 45.3 51.6 |
55 | 4.8 | |||
|
XBD12.3/45-IS125-80-315(Ⅰ)1) |
1.30 1.23 1.16 |
58 73 73 |
60.0 74.6 85.2 |
90 | 4.5 | |||
| 28.0 33.6 36.4 |
37 | |||||||
|
XBD5/55-IS125-100-200(Ⅱ)1) |
118.8 198 234 | 33 55 65 | 0.55 0.50 0.43 |
67 81 80 |
||||
|
XBD7.8/55-IS125-100-250(Ⅱ)1) |
0.85 0.78 0.71 |
66 78 75 |
43 55.9 62.8 |
75 | 4.2 | |||
|
XBD12.3/55-IS125-100-315(Ⅱ)1) |
1.30 1.23 1.18 |
60 75 77 |
72.1 90.8 102 |
110 | 4.5 | |||
|
XBD3.0/55-IS150-125-315 |
0.32 0.30 0.28 |
70 79 80 |
1450 | 15.9 22.1 23.7 |
30 | 2.5 2.5 2.7 |
||
|
XBD5.1/55-IS150-125-400 |
0.54 0.51 0.46 |
62 75 74 |
27.9 36.6 40.8 |
45 | 2 2.8 3.4 |
|||
|
XBD3.2/110-IS200-150-315 |
237.6 396 475.2 | 66 110 132 | 0.36 0.32 0.28 |
70 82 80 |
34.6 42.5 44.5 |
45 | 3.0 3.5 4.0 |
|
|
XBD4.6/110-IS200-150-400 |
0.50 0.46 0.39 |
74 81 76 |
48.6 67.2 74.2 |
75 | 3.0 3.8 4.5 |
|||
|
XBD3.2/160-IS250-200-315 |
345.6 576 691.2 | 96 160 192 | 0.34 0.32 0.31 |
71 84.5 84 |
1480 | 51.7 65 71.4 |
75 | 4.8 5.5 7 |
| 75.8 101.5 117.1 |
132 | |||||||
|
XBD5/160-IS250-200-400 |
0.55 0.50 0.47 |
71 84.5 82.5 |
||||||
|
Note: 1 ) inlet, outlet diameter and nominal diameter the same pump impeller due to performance parameter, so the use of (I ), ( II ) to distinguish between. |
||||||||
| Pump model | A1 | L1 | L2 | L3 | H | B1 | B | L | n-d | a | h |
|
XBD3.3/5-IS65-50-160 |
110 | 830 | 190 | 540 | 220 | 400 | 450 | 940 | 4-16 | 80 | 160 |
|
XBD4.8/5-IS65-40-200 |
110 | 830 | 185 | 540 | 250 | 400 | 450 | 1075 | 4-16 | 100 | 180 |
|
XBD7.8/5-IS65-40-250 |
160 | 1075 | 220 | 660 | 270 | 490 | 540 | 1200 | 4-16 | 100 | 225 |
|
XBD12.5/5-IS65-40-315 |
155 | 1200 | 245 | 740 | 290 | 550 | 600 | 1400 | 4-20 | 125 | 250 |
|
XB, , , D3.2/10-IS80-65-160 |
110 | 830 | 185 | 540 | 250 | 400 | 450 | 960 | 4-16 | 100 | 180 |
|
XBD5.5/10-IS80-50-200 |
130 | 955 | 210 | 600 | 250 | 440 | 490 | 1085 | 4-16 | 100 | 200 |
|
XBD8.5/10-IS80-50-250 |
130 | 1135 | 220 | 660 | 270 | 490 | 540 | 1270 | 4-20 | 125 | 225 |
|
XBD12.7/10-IS80-50-315 |
155 | 1200 | 245 | 740 | 315 | 550 | 600 | 590 | 4-26 | 125 | 280 |
|
XBD3.3/25-IS100-80-160 |
130 | 1075 | 220 | 660 | 250 | 490 | 540 | 1200 | 4-16 | 100 | 200 |
|
XBD5/25-IS100-65-200 |
130 | 1135 | 220 | 660 | 270 | 490 | 540 | 1270 | 4-20 | 100 | 255 |
|
XBD8.2/25-IS100-65-250 |
140 | 1215 | 245 | 740 | 290 | 550 | 600 | 1400 | 4-20 | 125 | 250 |
|
XBD12.1/25-IS100-65-315 |
210 | 1505 | 325 | 940 | 390 | 670 | 720 | 1655 | 4-20 | 125 | 280 |
|
XBD3.1/45-IS125-80-160 |
155 | 1200 | 245 | 740 | 290 | 550 | 600 | 1410 | 4-20 | 100 | 225 |
|
XBD5/45-IS125-80-200(I)1) |
140 | 1270 | 260 | 740 | 315 | 550 | 590 | 1450 | 4-20 | 100 | 250 |
|
XBD7.8/45-IS125-80-250(I)1) |
210 | 1505 | 3225 | 940 | 390 | 670 | 820 | 1635 | 4-20 | 100 | 280 |
|
XBD12.3/45-IS125-80-315(I)1) |
210 | 1600 | 325 | 940 | 425 | 670 | 720 | 1855 | 4-20 | 125 | 315 |
|
Pump model |
A1 | L1 | L2 | L3 | H | B1 | B | L | n-d | a | h |
|
XBD5/55-IS125-100-200(Ⅱ)1) |
140 | 1270 | 260 | 740 | 335 | 550 | 600 | 1440 | 4-20 | 125 | 280 |
|
XBD7.8/55-IS125-100-250(Ⅱ)1) |
210 | 1505 | 325 | 940 | 390 | 670 | 720 | 1690 | 4-20 | 140 | 280 |
|
XBD12.3/55-IS125-100-315(Ⅱ)1) |
210 | 1540 | 325 | 940 | 425 | 670 | 720 | 1870 | 4-20 | 140 | 315 |
|
XBD3.0/55-IS150-125-315 |
160 | 1285 | 290 | 840 | 390 | 600 | 600 | 1450 | 4-20 | 140 | 355 |
|
XBD5.1/55-IS150-125-400 |
160 | 1345 | 290 | 840 | 425 | 600 | 650 | 1545 | 4-20 | 140 | 400 |
|
XBD3.2/110-IS200-150-315 |
190 | 1555 | 320 | 940 | 425 | 670 | 720 | 1750 | 4-20 | 160 | |
|
XBD4.6/110-IS200-150-400 |
190 | 1665 | 340 | 940 | 425 | 670 | 720 | 1890 | 4-20 | 160 | 450 |
|
XBD3.2/160-IS250-200-315 |
95 | 1940 | 250 | 1980 | 425 | 750 | 820 | 2265 | 6-24 | 180 | 450 |
|
XBD5/160-IS250-200-400 |
95 | 2188 | 250 | 1640 | 465 | 755 | 825 | 2520 | 6-24 | 180 | 500 |
|
Note: 1 ) inlet, outlet diameter and nominal diameter the same pump impeller due to performance parameter, so the use of (I ), ( II ) to distinguish between. |
|||||||||||
| Pump model | Suction flange | Exhaust flange | 质量 kg | ||||||||
| DN | D | K | C | n-z | DN | D | K | C | n-z | ||
| XBD3.3/5-IS65-50-160 | 65 | 185 | 145 | 20 | 4-17.5 | 50 | 165 | 125 | 20 | 4-17.5 | 191 |
| XBD4.8/5-IS65-40-200 | 65 | 185 | 145 | 20 | 4-17.5 | 40 | 150 | 110 | 18 | 4-17.5 | 170 |
| XBD7.8/5-IS65-40-250 | 278 | ||||||||||
| XBD12.5/5-IS65-40-315 | 417 | ||||||||||
| XBD3.2/10-IS80-65-160 | 80 | 200 | 160 | 20 | 8-17.5 | 65 | 185 | 145 | 20 | 4-17.5 | 155 |
| XBD5.5/10-IS80-50-200 | 80 | 200 | 160 | 20 | 8-17.5 | 50 | 165 | 125 | 20 | 4-17.5 | 230 |
| XBD8.5/10-IS80-50-250 | 335 | ||||||||||
| XBD12.7/10-IS80-50-315 | 430 | ||||||||||
| XBD3.3/25-IS100-80-160 | 100 | 220 | 180 | 22 | 8-17.5 | 80 | 200 | 160 | 20 | 8-17.5 | 250 |
| XBD5/25-IS100-65-200 | 100 | 220 | 180 | 22 | 8-17.5 | 65 | 185 | 145 | 20 | 4-17.5 | 335 |
| Pump model | Suction flange | Exhaust flange | 质量 kg | ||||||||
| DN | D | K | C | n-z | DN | D | K | C | n-z | ||
| XBD8.2/25-IS100-65-250 | 100 | 220 | 180 | 22 | 8-17.5 | 65 | 185 | 145 | 20 | 4-17.5 | 440 |
| XBD12.1/25-IS100-65-315 | 824 | ||||||||||
| XBD3.1/45-IS125-80-160 | 125 | 250 | 210 | 22 | 8-17.5 | 80 | 200 | 160 | 20 | 8-17.5 | 386 |
| XBD5/45-IS125-80-200(I)1) | 500 | ||||||||||
| XBD7.8/45-IS125-80-250(I)1) | 875 | ||||||||||
| XBD12.3/45-IS125-80-315(I)1) | 1290 | ||||||||||
| XBD5/55-IS125-100-200(Ⅱ)1) | 125 | 250 | 210 | 22 | 8-17.5 | 100 | 220 | 180 | 22 | 8-17.5 | 500 |
| XBD7.8/55-IS125-100-250(Ⅱ)1) | 817 | ||||||||||
| XBD12.3/55-IS125-100-315(Ⅱ)1) | 1290 | ||||||||||
| XBD3.0/55-IS150-125-315 | 150 | 285 | 240 | 24 | 8-22 | 125 | 250 | 210 | 22 | 8-17.5 | 605 |
| XBD5.1/55-IS150-125-400 | 640 | ||||||||||
| XBD3.2/110-IS200-150-315 | 200 | 340 | 295 | 24 | 12-22 | 150 | 285 | 240 | 24 | 8-22 | 825 |
| XBD4.6/110-IS200-150-400 | 1110 | ||||||||||
| XBD3.2/160-IS250-200-315 | 250 | 405 | 355 | 28 | 12-28 | 200 | 340 | 295 | 24 | 12-22 | 1630 |
| XBD5/160-IS250-200-400 |
|
||||||||||
|
Note: 1 ) inlet, outlet diameter and nominal diameter the same pump impeller due to performance parameter, so the use of (I ), ( II ) to distinguish between.。 |
|||||||||||
【Products】